Shabby (Vintage?) Fall - October 2022 Mood Board + Scrapbooking Kit
Hey, y’all! I just love the papers in this month’s Scrapbooking Kit! The mix of white with a touch of light grey is perfect for building or expanding on.
Now I know, if you’ve seen the mood board you may be wondering how I came to a pink and grey mixed media panel from a mood board filled with autumn colors and décor with a “Vintage Fall” twist (Shabby is a form of “vintage,” right? I’m not the only one that thinks that, am I?). Well, I’ll tell you – it all started with the sweater pillow – and I do have some leaves on here!
I will admit, I love the mix of white and grey – I adore Farm Chic décor – but I don’t normally lean towards pinks. In fact, there are probably people who know me that are very confused right now seeing this pink! However, contrary to popular belief, I don’t hate pink, I just won’t wear it (unless it’s socks!) or decorate with it. (Fun fact: I will put pink in “strange” areas – my phone cases, Kindle cover, wallet, etc.)
Check out my video to see what I did to get this project all put together:
This month’s mood board is filled with beautiful autumn colors and fabulous textures to inspire your project! Mood boards aren’t really meant to be “copied” – they are, as the name suggests, designed to invoke a mood in you. How do they make you feel? What parts catch your eye?
As I mentioned, I saw that cable knit pillow and then just ran with it! I just thought something like that would be a fabulous background. Truthfully, I didn’t even notice that the mood board had some pink flowers on it until after I had finished my panel!
...
For my panel, the first thing I did was get the paper I had picked out collaged down to the canvas using some Liquitex Matte Medium – although any collage medium would work such as Mod Podge, Distress Collage, etc. I didn’t trim my paper until after I had it glued down and it had a chance to dry. It is a little less stressful if I am not worrying about every edge being perfectly lined up!
 |
 |
After the matte medium dried and I cut down the edges, I started the stenciling process. I used my “Victorian Tiles” stencil first, with a mix of regular (Ranger Opaque Matte) texture paste, then came back through and added some areas of Distress Crackle Paste. I also grabbed up a leaf stencil and added it to a few areas between and on top of the previous stenciling. Then, and this might be the most important part for me, I let it all dry overnight! It is possible to use a heat gun on texture paste, even crackle paste, but allowing anything “crackle” to dry naturally has always given me the best results. Drying too quickly just doesn’t allow the crackle to crack as much. Then, the next morning, I came in with the leaf stencil again, lined it up on the previous stenciling, and added some extra crackle paste and some “Kitsch Flamingo” Embossing Glaze – then set the panel off to dry and crackle before coming in and melting the glaze.
To finish off preparing the base, I added the two skinnier ScrapBerry column pieces and little “bricks” along the top – cutting one of the columns in half (I used a pair of wire cutters, and with a little squeeze it snapped right apart!). I didn’t want my canvas perfectly symmetrical, so I used one of the halves and one of the bricks on the left, and the other half, whole piece, and second brick on the right. Then, after the glue had set, I coated the entire background in clear gesso and set it off to dry while I started work on the flowers.
 |
 |
For my flowers, I started by gathering up some white roses and leaves from my stash and dismantling the pink flowers from the kit – separating the green parts from the pink. Then the prep work began!
I started by coating all my white flowers and leaves, along with the two long leafy pieces from the 49 & Market flower pack, with some white gesso. Then I grabbed up a sheet of the paper from the kit to cut out some extra leaves from one section, and I fussy cut a few of the larger pink flowers from the other side of the sheet (it is the second, matching sheet from the pack that I used for the background).
Now things were really about to get messy!
I coated all of the die-cut leaves in Distress Translucent Grit Paste - working carefully with the now wet paper – to crumple, uncrumple, and shape the leaves while placing them on my background where I planned on building up all the flower clusters. I also took this opportunity to add the Translucent paste to the fussy cut flowers so I could shape them, add a layer of protection, and get them in place.
For all of my green pieces from the flower packs and the white roses and leaves from my stash, I made a mixture of white gesso and opaque matte texture paste to coat them in, placing the long leaf pieces from the 49 & Market pack on my background and setting the rest aside to dry.
 |
 |
My next step was to get some extra color on all of my flowers and foliage!
For the fussy cut flowers on the background, I used a combination of Tattered Rose Distress Oxide and my Kitsch Flamingo and Cocktail Party Distress Crayons – just using a water brush to add a bit of color and definition to the fussy cut pieces.
Then, to add a bit more depth to the pink flowers from the kit, I made a “puddle” of the Kitsch Flamingo and Cocktail Party Distress Crayon’s mixed together and brushed them on to the inner edges of the petals. To get the color to feather out a bit, I just gave the flowers a light spray of water and let them air dry.
For the six smaller 49 & Market flowers that I pulled off their stems, I put them in a little palette and let them soak in some Cocktail Party Distress Mica Spray.
To get all of my other pieces various shades of gray, I started coating them in a mix of Grave and Crypt Distress Grit Pastes with some Pumice Stone Distress Oxide Spray thrown in!
After they were all coated with that mixture, I decided they needed more gray – the Pumice Stone has a tan-ish tone – so I sprayed them with a mixture of Hickory Smoke and Weathered Wood Spray Stains and Oxides.
Even though a lot of my water-reactive mediums are mixed with texture pastes, the colors on the flowers were not! So, I took this opportunity to give everything a coat of Workable Fixatif so I could continue working without worrying about my colors moving.
Now I had to add some color to the 49 & Market leaves I had already attached to the canvas. For those, all I did is make a mix of Hickory Smoke and Weathered Wood Distress Crayons on my mat, watered them down, and used my water brush to brush the colors on.
After a spray of Workable Fixatif on the canvas, I started the process of getting all of my flowers and foliage in place using some 3D Matte Gel.
While the 3D Matte Gel started drying, I worked on all of my mould pieces. After coating everything in white gesso and letting that dry, I started adding all of the other mediums.
For my large, pink keyhole frame, I started with a base of Tattered Rose Distress Paint, Translucent Grit Paste, and Finnabair Texture Powder for a little extra texture to make up for the watering down of the paste. While that mix dried, I started work on all of my gray pieces, using a mix of Grave and Crypt Distress Grit Pastes, and Finnabair’s Cool Gray Rust Effect Paste. After all those pastes were dry, I coated them in a light layer of Hickory Smoke Distress Paint, gave them a light mist of water, and dabbed of areas of the paint to allow areas of the texture pastes to show through and add some variation of color.
While the paint was drying on the gray pieces, I went back to the pink piece and gave it a light, inconsistent coating of Kitsch Flamingo Distress Paint, some spots of Cocktail Party Distress Mica Spray and some water. After all of that was dry, I came back with Kitsch Flamingo and Cocktail Party Distress Crayons, adding them directly to the mould piece, and watered them down so the colors could flow where they wanted as it air-dried.
To finish up all of the gray mould pieces, I added some Hickory Smoke Distress Spray Stain, mixed it up with some Graphite Texture Paste, spread it around some, then sprayed them all with both Hickory Smoke and Weathered Wood Distress Oxide Sprays before that paste has a chance to dry.
Now it was finally time to get everything on the panel and finish it up!
After all of my mould pieces were in place, I added some areas of DecoArt White Crackle Paint, tucked in some pink sisal, added more crackle paint, got my Ingvild Bolme birds in place, and added a little crackle paint to them.
After the 3D Matte Gel had a chance to set up overnight, I mixed some Payne’s Gray watercolor paint with some water and Liquid Color Fluid Medium and used a pipette to get that mix under all of the flowers and mould pieces. For any areas I wanted to make a little grayer, I mixed the Payne’s Gray with some of the fluid medium and brushed it on, watering it down some if I needed to.
For all of the “shadow” making, it was just a process of adding the mediums, adding water if I needed to, and tilting and turning the panel until I had the colors where I wanted them – drying a little at a time to start getting the color set as I went.
For the cabochon [mould] pieces, I used a mix of white gesso and Tattered Rose Distress Paint as my base coat then added some Kitsch Flamingo Distress Paint before adding them to the canvas. Once on the canvas, I added a thin layer of the crackle paint to them, blending it out onto the canvas around them some.
On top of all the crackle paint I added, I started to give some extra color and definition to all of my pieces using Distress Crayons – Kitsch Flamingo and Cocktail Party on the pink areas, and Hickory Smoke and Weathered Wood on the gray pieces and birds.
To add a little extra sparkle to the flowers, I brushed on some Finnabair Pixie Effect Paste – it has the pink flakes in it to go with the canvas, but it also has some light teal-ish flakes for a bit of contrast.
After everything was dry, it gave me a chance to stand back and take a look to see if there were any areas I wanted to add a bit more Payne’s Gray to.
The last step was to add the final touches with some Finnabair Waxes, and I was finally done!
Thank you for joining us here at Tres Jolie. I hope my non-traditional, vintage-shabby-fall, mixed media panel gave you some ideas of how you can interpret the October mood board and what you can do with this month’s Scrapbooking Kit.
Stay Crafty, Friends
...
Did you get a kit? Share what you made in our Facebook Group!
Thank you for joining us here at Tres Jolie Kits!
...
Tres Jolie can also be found at:
...
In addition to this month’s Scrapbooking Kit (*from previous Tres Jolie Kits), I used:
*DecoArt White Crackle Paint , *TCW “Mini Art Deco Leaves” Stencil , *Ingvild Bolme Shabby Chic Treasures “Birds” , *Finnabair Liquid Fluid Color Medium , *Finnabair Texture Powder , *Finnabair “Graphite” Texture Paste , Finnabair “Pixie” Effect Paste , *Finnabair “Old White” Matte Wax , Finnabair “Shabby Pink” Matte Wax , Finnabair “Indian Pink” Metallique Wax , Finnabair “Sweet Rose” Metallique Wax , Finnabair “Ash Grey” Antiquing Wax , Finnabair Clear Antiquing Wax , Finnabair “Victorian Tiles” Stencil , Finnabair “Baroque Frames” Mould , Finnabair “Locks and Keys” Mould , Finnabair “Clockfaces” Mould , Finnabair “Cool Grey” Rust Effect Paste , Finnabair Clear Gesso , Finnabair 3D Matte Gel , Winsor & Newton “Payne’s Gray” Watercolor , Ranger Texture Paste “Opaque Matte” , *Distress Texture Paste “Crackle” , Distress Grit Paste “Translucent” , Distress Grit Paste “Crypt” , Distress Texture Paste “Grave” , Distress Oxide Spray “Tattered Rose” , Distress Oxide Spray “Pumice Stone” , Distress Spray “Weathered Wood” , Distress Oxide Spray “Weathered Wood” , Distress Spray Stain “Hickory Smoke” , Distress Oxide Spray “Hickory Smoke” , Distress Mica Stain “Cocktail Party” , Distress Crayon “Picket Fence” , Distress Crayon “Tattered Rose” , Distress Crayon “Kitsch Flamingo” , Distress Crayon “Cocktail Party” , Distress Paint “Tattered Rose” , Distress Paint “Kitsch Flamingo” , Distress Paint “Hickory Smoke” , Distress Embossing Glaze “Kitsch Flamingo” , Tim Holtz “Skeleton Leaves” Thinlits , Ranger Water Brush , *Prima Water Brush , white ribbon roses , white leaves , pink sisal , Mont Marte 12” x 12” Canvas Panel , Liquitex Matte Medium , Daler Rowney White Gesso , Gorilla Clear Grip , Amazing Casting Resin , *spray bottle