Mixed Media Cards! - September 2022 Cards, Tags, & More Kit
Hey, y’all! It’s been officially autumn for a week now, and I don’t know about you, but I’m still wearing shorts! It’s the give and take of living in a southern state. Mild winters, which makes the husbands hot-mess joints happy; but less-than-desirable (for me) hot and humid summers. As for me, I’d be happy with two seasons – spring and autumn! The best temperatures and the best colors!
It is almost October though, and besides the lower temperatures here in the northern hemisphere, the October Kits will be getting revealed on Monday! YAY! New crafty supplies and lower temperatures? Yes, please! So, to bring September and the summer to an end, I have two more cards this month – both with a little extra touch to them using some mixed media mediums.
Neither of these cards are difficult – the majority of their assembly time is spent just waiting for the mediums to dry. Check out my video to see how these two cards came together.
Now, let's get to some photos and highlights of what you saw in the video.
This first card is a step-card that I created. I used a dark pink cardstock for the base topped with some white, printer-weight cardstock. I did put a solid back on my step-card, which also required a couple of extra pieces tucked in to make sure my “Let’s Celebrate” square popped forward when the card was standing up.
Before I glued on the patterned paper, I added some light mixed media. I used the DecoArt Crackle glaze from this month’s Mixed Media Kit with the Prima stencil from the August (2022) Mixed Media kit, and before I removed the stencil, I added a little dusting of some Jaquard PearlEx powder, and a little spritz of Finnabair’s “Pixie Dust” Fixative. Then I just set those pieces off to dry while I worked on the center pieces.
I used the dies from the kit this month to add some decorative cuts at the tops of the patterned paper that would be going on the steps and backed them with a piece of paper that I coated in the beautiful ink from the kit. Now it was just a matter of gluing everything down!
I added the patterned paper that I had stenciled on and started building up my steps. I glued the top of the back step patterned paper to the back of the card, and the bottom of the back step patterned paper to the back of the lower step. Then, to help keep the “Let’s Celebrate” square stay forward, I added some extra pieces of white cardstock to help “push” it forward.
When everything was done, I added some of the Prima gold trim circles to the front and gave the card a final spritz of Finnabair’s “Pixie Dust” Fixative for a little extra shine.
This slimline card went together even faster than the step-card, because I didn’t have any cut files! I used another piece of dark pink cardstock as the card base, set it aside, and started working on my layers.
Since the slimline card is 4” x 10”, and the pink and white striped paper from the kit was an 8” x 8” square, I cut one piece 6” long and a second piece 2” – both are 3.75” wide - I knew the seam would never be seen by the time I was done! (I used some double-sided tape to hold the two pieces together at the seam while I kept working!)
I mixed some of the ink from this month’s kit with some of the glitter paste from this month’s Mixed Media kit together and lightly brushed it along the edges of the flowers, and then added what was left to the striped paper. After the glitter paste had dried, I grabbed up some white texture paste and a palette knife and scraped a thin layer of the paste onto the surface of the striped paper and used a paint comb to add some stripes in the texture paste; then I glued the striped pieces down to the white cardstock.
Once the texture paste had dried, it was just a matter of gluing all of my flowers down, along with some leaves die cuts (using a die from my stash), a few bits of lace trim, and the sentiment square. I used my hot glue gun for all of this, so I was able to move right to adding the sequins to the front after adding the top “For Someone Special” sentiment at the top and a little square of the same teal paper at the bottom just to have that blue “continue” all the way down. All I did to add the sequins was use some more texture paste, watered down a little to make it more spreadable, dip a brush into the paste, use it to pick up some sequins, and “brush” them on.
Thank you for joining us here at Tres Jolie! I hope you enjoyed all of the projects created this month by all of the members of the Design Team! Don’t forget, Monday October 3, 2022, is reveal day for the October Tres Jolie Kits!!
Stay Crafty, Friends
Did you get a kit? Share what you made in our Facebook Group!
Thank you for joining us here at Tres Jolie Kits!
Tres Jolie can also be found at:
In addition to this month’s Cards, Tags, & More Kit and the Crackle Glaze & Sparkle Texture Paste from this month’s Mixed Media Kit (*from previous Tres Jolie Kits), I used:
*Prima “Tubaroses” Stencil , *Jacquard “Brilliant Gold” PearlEx , *Finnabair Pixie Dust Fixative , *Buttons Galore & More “28 Lilac Lane” , Ranger Opaque Matte Texture Paste , Momenta Dies 2157535 , heavy cardstock – dark pink , white printer weight cardstock , Spellbinders Tool ‘n One , Silhouette Cameo 3 , Nicapa Mat , Silhouette Premium Blade , Sizzix Big Shot Plus , *spray bottle , 1” double-sided tape , Art Glitter Glue , Gorilla Hot Glue Stick , hot glue gun , lace trim