Grungy Journal! - August 2022 Mood Board + Scrapbooking Kit
Hey, y’all! After much toil and trouble, I finally got this grungy journal put together! You see, mentally I have an order of operation for my projects – my first project of the month focuses on the Cards, Tags, & More Kit, and my second project is for the mood board – this month ran a little different though because <gestures at everything>!
Anywho…I finally finished my mood board project! I’m GenX and that means I lived through Nirvana and weird metal jewelry and all thing’s flannel, so I couldn’t help but get excited about the papers this month - Grunge Reinvented by 3 Quarter Designs.
The general construction of this journal is like most junk journals, so my video focuses on how I put the cover together, a bit about the open spine, and some highlights on what is in the signatures.
Isn’t the mood board fabulous? Rust, film, watches – so much grungy and/or steampunk inspiration here! Make sure to join in this month and share your creation in the August Mood Board Folder by the end of the month.
My cover consists of corrugated cardboard, chicken wire, chipboard, cardstock, decorative paper, and tons of mediums. I shaped my corrugated cardboard, dyed my white Artisan (linen blend) cardstock, added some Finnabair decorative paper to it, glued everything together, poked the ends of my chicken wire through so they wouldn’t stick out, and added layer upon layer of paints, stains, powders, and pastes to the cover until I got a color combination I was happy with.
I added some resin stars made with my Finnabair “Stars and Moons” mould, and coated them with some of the “Statue” Foundry Wax. I added multiple layers of embossing powder to the cardstock phrase and used the “Statue” Foundry Wax to create a “frame” around it. Then I used the “Sterling” Foundry Wax to create splatters on the cover and the phrase.
When I started this Grungy Journal, I didn’t know exactly how an open spine would work, and I wanted to make sure the herringbone binding had something sturdy to hang on to, so I used the metal hangers that I had removed from the hanging folders to wrap the binding around, then I used some JB Weld epoxy to really make sure it was a sturdy and solid attachment to the chipboard cover pieces.
I used a variety of alcohol inks and mixatives to stain my herringbone binding to grunge it up, and found this "Exposed Tape Binding" open spine tutorial by Molly Brooks inspirational and very easy to follow along with (this was my first open spine!). However, because my signatures weren’t going to be evenly stacked – as seen in Molly’s tutorial – I added a single stitch through the herringbone binding to keep my signatures in place.
I used some sari silk to create my tie closure – sewing it as a tube, knowing one end and leaving a few inches unsewn so I could lay it flat between the chipboard and mixed media cover I created. While I did make sure there was a lot tucked in and glued down, as I kept working on my journal, I decided I wanted to reinforce the edges where the strain would be.
For the reinforcement, I folded the sari silk back on itself, and added some E6000 and bookbinding tape.
Then I punch two holes through, making sure to go through the layers of sari silk, added some Chicago [style] screws (they look like the posts from traditional post-bound scrapbooks), a couple of washers - with some more E6000 - to make sure I had a tight fit, and some Loctite for the threads.
With all the different junk journal tutorials available for construction, I am just going to highlight what can be found within my Grungy Journal. I have the standard variety of papers and envelopes, and I made clusters to use as decorations and/or tuck-in spots. For the button images from the cut apart sheet, I used my awl to poke the thread holes out, then added some of the bookbinding thread I had cut off after I tied my signatures in place – and topped it with some Glossy Accents to create a faux enameled/epoxy surface. In fact, I added the Glossy Accents to a lot of the cut apart pieces to give them that faux surface, which really give a sense of depth to the images!
For the chipboard filmstrips from the Grunge Reinvented collection, I layered up four different embossing powders. First, I used some Lawn Fawn Fake Tan ink, added some Rocky Road & Ancient Amber Baked Textures, and while it was still hot and sticky I added more Rocky Road, melted that, added some Chunky Rust Baked Texture, and then finally some Rusty Hinge Embossing Glaze – always on top of the still hot previous layers.
For my clusters, tuck-ins, and pockets, I used a combination of glue, my tiny attacher, and stitching to put them together and adhere them. When I did use the tiny attacher, I made sure the underside of the staples would be covered, that way they wouldn’t come out (as easily!) and there wouldn’t be any rough edges.
I used a combination of papers from the scrapbooking kit, papers from my stash, and even pieces from the hanging folders that had been cut off when I was cutting them down to size.
I have a variety of textures throughout the journal – using paper doilies, vintage crocheted squares, stitching, and a variety of fibers and trims.
In addition to my tuck in spots and pockets, I added in some envelopes and belly bands. I even have some pieces of grungy handmade paper in a few spots!
To make sure there was ample writing space, my third signature is fill with papers that have no decorations, pockets, or tuck in spots. I just stitched two pieces of sari silk together (they have a light interfacing on them to give them a little stability) and ran the whole stack through my sewing machine before adding the holes for the bookbinding thread to attach it to the open spine.
Thank you for joining us here at Tres Jolie. I hope you enjoyed this Grungy Junk Journal, and it gave you some inspiration of what you can do with this month’s Scrapbooking Kit and some ideas of how to interpret this month’s mood board!
Stay Crafty, Friends
Did you get a kit? Share what you made in our Facebook Group!
Thank you for joining us here at Tres Jolie Kits!
Tres Jolie can also be found at:
In addition to this month’s Scrapbooking Kit & the Foundry Waxes from this month’s Mixed Media Kit (*from previous Tres Jolie Kits), I used:
*Dress My Craft “Gentleman Accessories” Transfer Me , *KaiserCraft 12”x12” Corrugated Cardboard , *LemonCraft “Leaves” A4 Basic Paper Pad , Distress Embossing Glaze “Rustic Wilderness” , Distress Paint “Rustic Wilderness” , Distress Oxide Spray “Rustic Wilderness” , Distress Grit Paste “Crypt” , Distress Texture Paste “Grave” , Distress Grit Paste “Translucent” , Distress Ink “Brushed Corduroy” , Distress Oxide “Brushed Corduroy” , Distress Embossing Glaze “Rusty Hinge” , Tim Holtz “Bubbles” Stamp , Tim Holtz “Textile Surfaces” , Tim Holtz Long Fastners Brads , Tim Holtz Tiny Attacher & Tiny Attacher Refills , Tim Holtz “Film Strip Ribbon” , Tim Holtz Sanding Block , Tim Holtz Naturals, Black/Cream Trimmings , Distress Collage Medium , Lawn Fawn “Fake Tan” Dye Ink , Mod Podge “Antique Matte” , green bakers twine , *Nuvo “Seaweed Quartz” Glimmer Paste , *Nuvo “Black Ash” Embellishment Mousse , Country Craft Creations “White” Artisan Cardstock , Darice “Rusty” Chicken Wire Ribbon , Finnabair “Sparkling Onyx” Jewel Effect Paste , *Finnabair “Burnt Sienna” Liquid Acrylic Paint , *Finnabair “Ink Black” Liquid Acrylic Paint , Finnabair “Green” Rust Effect Paste , *Finnabair “Graphite” Texture Paste , Finnabair “Cream” Texture Effect Paste , Finnabair “Rusty” Rust Effect Paste , Finnabair “Stars and Moons” Mould , *Finnabair “Romantica” Decorative Paper , *Finnabair Heavy Black Gesso , Finnabair 2” Silicone Brush , Finnabair Clear Gesso , Finnabair 3D Matte Gel , Seth Apter Baked Texture “Rocky Road” , Seth Apter Baked Texture “Dirty Sand” , Seth Apter Baked Texture “Chunky Rust” , Seth Apter Baked Texture “Ancient Amber” , Ranger Emboss It Ink Refill , Ranger Big Emboss It , Ranger Extra Thick Clear Embossing Powder , Ranger “Frosted Crystal” Embossing Antiquities , Taylored Expressions “Corrugated” Embossing Folder , various papers: ledger pages, vintage music, piano roll paper , etc. , hanging folders, patterned papers , Tea Bag Paper , paper doilies: white , silver , *black , EK Tools Binding Edge Punch , Amazing Casting Resin , 1/2” Herringbone Binding , Liquitex Matte Medium , E6000 , JudiKins Diamond Glaze , Fabri-Tac , Art Glitter Glue , Ranger Glossy Accents , Aleene’s Tacky Glue , BookGuard 3” Black Book Binding Tape , JB Weld , Selocky Chicago Screws , washers , Loctite Thread Lock , Ranger Heat-It Tool , We R Memory Keepers Envelope Punch Board , Craft Knife , Crop-A-Dile II , Hole Reinforcer Punch , Corner Chomper Fiskars 1” Circle Squeeze Punch , 1” & 1/8” double-sided tape , eyelets , Pellon 805 Wonder-Under Iron-On Adhesive , LineCo PVA , Dritz Fray Check , book binding thread , needles , awl , blending brushes , various sari silk remnants , Krylon Workable Fixatif
Cover Colors (used on the white Artisan cardstock): Lindy’s Gang Starburst Squirts *“Maple Syrup Bronze,” *“Hocky Puck Black,” & *“Beaver Tail Brown” , *“Cathedral Pines Green” Magical Shaker , “Bratwurst Brown” Magical Shaker , *“Black Hole Black” Magical Powder , *Finnabair “Burnt Sienna” Liquid Acrylic Paint , Liquitex “Transparent Raw Sienna” Liquid Acrylic Ink , Liquitex “Transparent Raw Umber” Liquid Acrylic Ink , Ranger Perfect Pearls “Forever Green”
Open Spine Strips: Tim Holtz Alcohol Blending Solution , Tim Holtz “Latte” Alcohol Ink , “Gold” Mixative , “Silver” Mixative , “Gunmetal” Mixative Alcohol Ink , 91% Isopropyl Alcohol